Your Best Source For Finding Local Remodeling Contractors!

Home Improvement

Tips

Research For Your Remodeling Project

Researching the type of home improvement project can pay off in the long run. By reading a few articles, or buying a magazine that specializes in your desired remodeling trade can give you some great ideas, as well as, prepare you for the project. Such items as time frame for completion, cosmetic tips, and layout can make a big difference in the way your remodeling project turns out. So go ahead and take a few minutes to read through one or all of our remodeling articles.

Home Improvement Articles:

Request A Quote


Roofing Contractors      

A New Roof Not Only Adds Protection To Your Home, it Increases Curb Appeal as well

A roof is a major part of a house's exterior. It adds protection for everything inside, adds color to the exterior, and accomplishes a certain look depending on the type of material used.

A Proper Roof System

Do You Know The 3 Layers Of A Roof?

There are three basic layers to a roof. Knowing each one and what they're for can help you find competent roofing contractors and know what to look for. Each layer is important and not having one done properly could lead to problems, such as a leaking roof, a short life span, or even a voided warranty. We have listed what each layer is for, and how it should be installed.

The First Layer:

The first layer of the roof is the sheathing or roof deck. A lot of people refer to this as the plywood, but oriented strand board (OSB) can be used as well. The sheathing should be approximately 1/2" or according to local building codes. Both plywood and OSB are suitable, each with a few different properties. The sheathing should be staggered with approximately 1/8" gap allowed for contraction and expansion. The sheathing should be nailed to the rafters every 6" on the boards and every 4" at the joints for proper installation. It's important that this criteria is achieved to have a properly installed roof deck. Make sure the roofing contractors you choose follows this guideline.

The Second Layer:

The second layer of the roof is the underlayment. This is sometimes referred to as the black paper or tar paper. This is the first layer of leak protection, and for this reason it is imperative that this layer be done properly. Typically the minimum required underlayment to meet building code is 15# paper. The underlayment also comes in a variety of other thicknesses such as 30#, 40#, 60#, and modified SBS. We always suggest using at least 30# or better for composition shingle roofs, and modified SBS for tile roofs for longer lasting leak protection. The underlayment comes in rolls and is rolled out onto the roof. Each layer should be overlapped at least 2"-3" and 6"-8" on an end lap. Normally nails should be placed 6" apart and 1" from the edge.

The Third Layer:

The third layer of the roof is the roofing material itself. There are several options such as composition shingle, tile, and flat. Your roofing contractor can help explain the different types available. There are many options and looks within each category; ask your MyLocalHomePro roofing contractor for detailed options.

Final Considerations:

There are several more considerations when replacing your roof, such as: edge flashing, pipe flashing's, chimney flashing and proper ventilation. Our professional roofing contractors can help you choose the roofing system that's best for you. Be sure to request your consultation today!

Get A Roof Quote Now



Home Improvement Trades                     Homeowner Resources                     Site Links
Replacement Windows Learn About Bathrooms Contractor Lead Sign Up
Kitchen Remodeling Contractors Learn About Vinyl Windows Home Improvement Affiliates
Roofing Contractors Learn About Solar Green Remodeling
Bathroom Remodeling Contractors Home Improvement Resources
Home Remodeling Contractors Submit Your Home Improvement Site